Model Options Only (click options for RFQ)
Sensor Output Type Analog RS232 DMS (single channel) RS232 DMS (dual channel) RS232 miniDMS USB mini DMS
Tip Options T1 T2 T3 T4 T5 T6 T7 T8 T9 T10 T11 S W Wb          
Cable Options C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 E              
Cable Connector Options B 2B B1 Bv1 Bv133 Bv2 Bv3 Bv4 BvF Fv1 Fv2 Fv3              
Amplifier Options A G1 G2 H1 H2 H3 +H1 +H2 +H3 L +L M N O P Q R V Z
Multi-channel Hardware 10DMS                                    

Option T1

Customized sensor tip, straight.

Option T2

Custom Sensor Tip, Straight and Threaded, Standard Lengths

Option T3

Custom Sensor Tip, Non-metallic, Peek or Torlon

Option T4

Simple right angle tip.

Option T5

Square body right angle tip, unthreaded.

Option T6

Square body right angle tip, threaded.

Option T7

Special tip made to customer specifications.

Option T8

High temperature tip, 350°C max.

Option T9

High temperature tip, 482°C max.

Option T10

Custom Sensor Tip, Metallic, non-magnetic, Brass or Aluminum

Option T11

Custom Sensor Tip, Invar

Option S

Side-viewing sensor tip.

Option W

Adds a sapphire window epoxied into the sensor tip.

Option Wb

Adds a sapphire window brazed to the sensor tip.

Option C1

Interlocking Stainless Steel.

Option C2

Silicone Rubber only.

Option C3

Silicone over Teflon Wrap.

Option C4

Silicone over Steel Monocoil.

Option C5

Teflon over SS Interlok.

Option C6

PVC Shrinkwrap over Nylon Wrap.

Option C7

Translucent Teflon.

Option C8

PVC Shrinkwrap only.

Option C9

Annealed (semi-rigid) SS Tubing.

Option C10

Silicone Over SS Interlok.

Option C11

Polyolefin Shrink Tubing for vapor barrier protection.

Option E

Extra length of fiberoptic cable.

Option B

Connectorizes sensor system with in-line connector. (D6, RC12 n/a). *Option B is also required for use with vacuum passthru flanges & assemblies Bv1, Bv2, Bv3, Bv4, BvF, BvW.

Option 2B

Provides a 3 piece sensor system; amplifier, extension cable and probe.

Option B1

Connectorizes sensor system with bulkhead connector (D6 n/a).

Option Bv1

Connectorizes sensor system with single channel vacuum passthru hardware for 1 E-7 TORR (1 nPa). Includes ultra-torr compression fitting (D6, RC12 n/a) *Requires Option B.

Option Bv133

Connectorizes Sensor System With Single Channel Vacuum Passthru Hardware Mounted in a 1.33" CF Flange, for 10 E-7 Torr (not available for D6, D12 or RC12) *Requires Option B.

Option Bv2

2 port single channel high vacuum passthru flange for D models for 1 E-11 TORR (10 pPa) (D6 n/a) *Requires Option B

Option Bv3

3 port single channel vacuum passthru flange for RC models for 1 E-11 TORR (10 pPa) (RC12 n/a) *Requires Option B.

Option Bv4

4 port dual channel vacuum passthru flange for D models for 10 E-11 TORR (D6 n/a) *Requires Option B

Option BvF

Multi-channel high vacuum passthru assembly for 1 E-7 TORR (1 pPa). Provides fused fiberoptic passthru and multi-channel vacuum flange assembly. Can accomodate 8 D type or 5 RC type sensors. (D6, RC12 & RC20 n/a) *Requires Option B.

Option Fv1

Low vacuum passthru for 10 E-4 TORR (1000 mPa). Provides solid section on fiberoptic cable, compression fitting, and stainless steel interlok sheathing on vacuum side.

Option Fv2

Low vacuum passthru for 10 E-4 TORR (1000 mPa). Provides solid section on fiberoptic cable, compression fitting, and stainless steel interlok sheathing on vacuum side.

Option Fv3

Low vacuum passthru for 10 E-4 TORR (1000 mPa). Provides solid section on fiberoptic cable, compression fitting, and stainless steel interlok sheathing on vacuum side.

Option A

Provides Temperature Stabilized Electronics For Low Drift and High Accuracy. **Provides two additional 12 bit analog outputs for muDMS sensors with USB output.

Option G1

Additional output, DC coupled with 10x gain and adjustable DC offset.

Option G2

Additional output, AC coupled with 10x gain.

Option H1

High frequency amplifier for D models up to 200 KHZ bandwidth.

Option H2

High frequency amplifier for D models above 200 KHZ to 1 MHZ bandwidth.

Option H3

Provides RC models with a high bandwidth amplifier, DC - 200 KHz. Bandwidths up to 350 KHz can be specified.

Option +H1

Additional output for D models with bandwidths up to 200 KHZ.

Option +H2

Additional output for D models with bandwidths exceeding 200 KHz up to 1 MHz.

Option +H3

Adds an additional high frequency output.

Option L

Low frequency amplifier (< 20 KHz), 100 Hz STD.

Option +L

Additional output with low frequency bandwidth (< 20 KHz), 100 Hz STD.

Option M

Digital display - DC volts.

Option N

Low Noise Amplifier - The amplifier is optimized to operate with highly reflective targets only. This cuts noise floor in half, thereby doubling resolution (For RC sensors only).

Option O

Provides an adjustable 0 to -4 VDC offset control. This feature is used to eliminate the DC offset from the sensor output, thereby increasing readout resolution.

Option P

Polynomial Curve Fit For Operation In Non-Linear Ranges.

Option Q

Connectorized AC/DC power adaptor and BNC output.

Option R

Ambient Light Rejection - These devices operate with continuous light emission. Standard units are subject to ambient light pickup. In environments where background light is a problem, Ambient Light Rejection can be included by specifying Option R. (Not available for models D6, D12).

Option V

Provides Sensor Amplifiers with 0 - 10 Volt Analog Output.

Option Z

Additional Output with Linear Range Spanning 0 - 5 volts.

10DMS

A 19 inch rack mount enclosure for powering and controlling up to 10 RS232 DMS sensor channels. It operates on AC power and is controlled via RS232 communication. Any combination of D and RC models can be mixed in the rack. Price includes RS232 cable, LabViewTM drivers and Philtec DMS Control Software.