Model D100 (click options for RFQ)
Sensor Output Type Analog RS232 DMS (single channel) RS232 DMS (dual channel) RS232 miniDMS USB mini DMS
Tip OptionsT1T2T3T4T5T6T7T8T9T10T11T12SWWb       
Cable OptionsC1C2C3C4C5C5iC6C7C8C9C10C11C12E        
Cable Connector OptionsB2BB1Bv1Bv133Bv2Bv3Bv4BvFFv1Fv2Fv3          
Amplifier OptionsADG1G2H1H2H3+H1+H2+H3L+LMNOPQR1R2R3VZ
Multi-channel Hardware5DMS10DMS                    

Option T1

Customized sensor tip, straight.

Option T2

Custom Sensor Tip, Straight and Threaded, Standard Lengths

Option T3

Custom Sensor Tip, Non-metallic, Peek or Torlon

Option T4

90° Tubing.

Option T5

Square body right angle tip, unthreaded.

Option T6

Square body right angle tip, threaded.

Option T7

Special tip made to customer specifications.

Option T8

High Temperature Tip 250°C continuous; 350°C intermittent.

Option T9

High Temperature Tip 350°C continuous; 450°C intermittent.

Option T10

High Temperature Tip >480°C; quartz fibers.

Option T11

Non-Magnetic Tip Brass or Aluminum.

Option T12

Invar Tip for low CTE.

Option S

Side-viewing sensor tip.

Option W

Adds a sapphire window epoxied into the sensor tip.

Option Wb

Adds a sapphire window brazed to the sensor tip.

Option C1

Jacket: Interlocking Stls Stl, crush proof, not liquid tight, widest temperature range.

Option C2

Jacket: Silicone, very flexible, liquid tight, not crush proof, good to 200°C.

Option C3

Jacket: Silicone over PTFE spiral wrap, semi-crush proof, short lengths only, good to 200°C.

Option C4

Jacket: Corrugated Plastic, semi-crush proof, liquid tight, good to 85°C.

Option C5

Jacket: PTFE over SS Interlok, crush proof with vapor barrier protection, good to 260°C.

Option C5i

Jacket: SS Interlok over PTFE, crush proof with vapor barrier protection, good to 260°C.

Option C6

Jacket: PVC over nylon wrap, semi-crush proof, good to 105°C.

Option C7

Jacket: PTFE tubing, MRI & EMF & Vacuum Compatible, Vapor Barrier, Cryogenic to 260°C.

Option C8

Jacket: PVC, not crush-proof, good to 105°C.

Option C9

Jacket: Semi-rigid Annealed SS tubing, good to 850°C.

Option C10

Jacket: Silicone over SS Interlok, good to 200°C.

Option C11

Jacket: Polyolefin Shrink Tubing, Thin wall moisture/vapor barrier, radiation resistant, not crush proof, good to 150°C.

Option C12

Jacket: Polyolefin over SS Interlok, Thin wall moisture/vapor barrier, crush proof, good to 150°C.

Option E

Extra length of fiberoptic cable.

Option B

Connectorizes sensor system with in-line connector. (D6, RC12 n/a). *Option B is also required for use with vacuum passthru flanges & assemblies Bv1, Bv2, Bv3, Bv4, BvF, BvW.

Option 2B

Provides a 3 piece sensor system; amplifier, extension cable and probe.

Option B1

Connectorizes sensor system with bulkhead connector (D6 n/a).

Option Bv1

Connectorizes sensor system with single channel vacuum passthru hardware for 1 E-7 TORR (1 nPa). Includes ultra-torr compression fitting (D6, RC12 n/a) *Requires Option B.

Option Bv133

Connectorizes Sensor System With Single Channel Vacuum Passthru Hardware Mounted in a 1.33" CF Flange, for 10 E-7 Torr (not available for D6, D12 or RC12) *Requires Option B.

Option Bv2

2 port single channel high vacuum passthru flange for D models for 1 E-11 TORR (10 pPa) (D6 n/a) *Requires Option B

Option Bv3

3 port single channel vacuum passthru flange for RC models for 1 E-11 TORR (10 pPa) (RC12 n/a) *Requires Option B.

Option Bv4

4 port dual channel vacuum passthru flange for D modelsfor 10 E-11 TORR (D6 n/a) *Requires Option B

Option BvF

Multi-channel high vacuum passthru assembly for 1 E-7 TORR (1 pPa). Provides fused fiberoptic passthru and multi-channel vacuum flange assembly. Can accomodate 8 D type or 5 RC type sensors. (D6, RC12 & RC20 n/a) *Requires Option B.

Option Fv1

Low vacuum passthru for 10 E-4 TORR (1000 mPa). Provides solid section on fiberoptic cable, compression fitting, and stainless steel interlok sheathing on vacuum side.

Option Fv2

Low vacuum passthru for 10 E-4 TORR (1000 mPa). Provides solid section on fiberoptic cable, compression fitting, and stainless steel interlok sheathing on vacuum side.

Option Fv3

Low vacuum passthru for 10 E-4 TORR (1000 mPa). Provides solid section on fiberoptic cable, compression fitting, and stainless steel interlok sheathing on vacuum side.

Option A

Provides Temperature Stabilized Electronics For Low Drift and High Accuracy.

Option D

Digital Control with analog output.

Option G1

Additional output, DC coupled with 10x gain and adjustable DC offset.

Option G2

Additional output, AC coupled with 10x gain.

Option H1

High frequency amplifier for D models up to 200 KHZ bandwidth.

Option H2

High frequency amplifier for D models above 200 KHZ to 1 MHZ bandwidth.

Option H3

Provides RC models with a high bandwidth amplifier, DC - 200 KHz. Bandwidths up to 350 KHz can be specified.

Option +H1

Additional output for D models with bandwidths up to 200 KHZ.

Option +H2

Additional output for D models with bandwidths exceeding 200 KHz up to 1 MHz.

Option +H3

Adds an additional high frequency output.

Option L

Low frequency amplifier (< 20 KHz), 100 Hz STD.

Option +L

Additional output with low frequency bandwidth (< 20 KHz), 100 Hz STD.

Option M

Digital display - DC volts.

Option N

Low Noise Amplifier - The amplifier is optimized to operate with highly reflective targets only. This cuts noise floor in half, thereby doubling resolution.

Option O

Provides an adjustable 0 to -4 VDC offset control. This feature is used to eliminate the DC offset from the sensor output, thereby increasing readout resolution.

Option P

Polynomial Curve Fit For Operation In Non-Linear Ranges.

Option Q

Connectorized AC/DC power adaptor and BNC output.

Option R1

Ambient Light Rejection for 850 nm LED.

Option R2

Blue Light Sensor, 470 nm.

Option R3

Visible red Light Sensor, 624 nm.

Option V

Provides Sensor Amplifiers with 0 - 10 Volt Analog Output.

Option Z

Additional Output with Linear Range Spanning 0 - 5 volts.

5DMS

A 19 inch rack mount enclosure for powering and controlling up to 5 RS232 DMS sensor channels. It operates on AC power and is controlled via RS232 communication. Any combination of D and RC models can be mixed in the rack. Price includes RS232 cable, LabView drivers and Philtec DMS Control Software.

10DMS

A 19 inch rack mount enclosure for powering and controlling up to 10 RS232 DMS sensor channels. It operates on AC power and is controlled via RS232 communication. Any combination of D and RC models can be mixed in the rack. Price includes RS232 cable, LabView drivers and Philtec DMS Control Software.