Accessories (click options for RFQ)
Sensor Calibrations cal-A cal-F cal-AN cal-FN
Calibration Check Mirror CM32940      
Compression Fittings CF125 CF187 CF312  
Mirrored Targeted Discs M25 M50    
Retro-Reflective Tape RT1      
Probe Mounting Blocks B25 B31    
Micro Stages 56416 56422    
mini-DMS Y-Cable Power Adaptors PS-1 PS-10 PS-U  
Option Q Power Supply PS-Q      
USB to Serial RS-232 Adaptor Cable ADB9      
mini "B" to "A" USB Locking Connector AUSB      

cal-A

Sensor calibrations in air

cal-F

Sensor calibrations in fluid

cal-AN

NIST Traceable Sensor Calibrations In Air

cal-FN

NIST Traceable Sensor Calibrations In Fluid

CM32940

5 x 2 mm Calibration Check Mirror. A calibration check mirror is provided along with a Certificate of Calibration which specifies the accuracy of a single point sensor reading.

CF125

Stainless steel compression fitting with nylon compression ferrules to hold sensor tips having 1/8" diameter tips (D63, D64, D100, RC100). Overall length is 1.4". They can be bulkhead mounted into a 0.4" deep straight threaded hole. Requires 5/16-24 threaded hole.

CF187

Stainless steel compression fitting with nylon compression ferrules to hold sensor tips having 3/16" diameter tips (D169 - D171, RC171). Overall length is 1.4". They can be bulkhead mounted into a 0.4" deep straight threaded hole. Requires 3/8-24 threaded hole.

CF312

Stainless steel compression fitting with nylon compression ferrules to hold sensor tips having 5/16" diameter tips (RC89, RC90, RC140, RC190). Overall length is 1.4". They can be bulkhead mounted into a 0.4" deep straight threaded hole. Requires 1/2-20 threaded hole.

M25

Mirrored Target Discs: Type 316 stainless steel 0.8 mm (.032") thick with #8 mirror polish. Ø 6.35 mm (1/4") Disc

M50

Mirrored Target Discs: Type 316 stainless steel 0.8 mm (.032") thick with #8 mirror polish. Ø 12.7 mm (1/2") Disc

RT1 Retro-Reflective Tape

100 mm square. Use Retro-Reflective Tape To Enhance Sensor Performance.

B25 Probe Mounting Blocks

For any model with Ø 1/4" collared probes.

B31 Probe Mounting Blocks

For any model with Ø 5/16" collared probes.

56416 Micro-Stage

Single Axis Stage, 0.18" Travel for use with Model B25 Block.

56422 Micro-Stage

Single Axis Stage, 0.50" Travel for use with Model B31 Block.

PS-1 mini-DMS Y-Cable Power Adaptor

Required for operaton of any mini-DMS sensor. Includes AC/DC power supply and Y adaptor cable with D-sub female 9 pin (standard RS-232 connector) and 2.1 mm coax male power connector.

PS-10 mini-DMS Y-Cable Power Adaptor

Enables single channel operation of any rack mountable mcDMS sensor (without using the 10DMS rack). Includes AC/DC power supply and Y adaptor cable with D-sub female 9 pin (standard RS-232 connector) and 2.1 mm coax male power connector.

PS-U mini-DMS Y-Cable Power Adaptor

Universal power supply for mini-DMS sensors (power supply only).

PS-Q Option Q Power Supply

Provides a 12 VDC, 500 ma AC/DC power supply terminated with Philtec's 3 Pin Weathertight Option Q Connector.

ADB9 USB To Serial RS-232 Adaptor Cable

A 500 Kbps High Speed Adaptor with 6 inch long cable, 9-pin Serial Male to USB Type A Male, USB 1.1 Compliant, Works with USB 1.1 & 2.0 ports. Requires Windows 98 SE, ME, 2000, XP, Vista, Windows 7

AUSB mini "B" to "A" USB Locking Connector

A 2 cm long, robust dust and waterproof connection, fully shielded providing good levels of noise immunity and EMI protection. For use with muDMS sensors.