PHILTEC APPLICATION NOTES
Aerospace Applications
Fiber Optic Probe Tips Can Be Polished On Angles To Bend Light As Needed
Compressor Blade Vibrations Measured with High Slew Rate Sensor - ppt presentation
Connectors Permit Removal and/or Replacement of Fiberoptic Tips and Cables
3 Examples of Cryogenic Applications
Side-viewing Is Combined with End Viewing Fiberoptics To Measure Turbine Blade Tip Clearance
4 Notes
I
llustrate Measurements To Glass: Edge Detection, Encoder Discs, Thick Glass, and Contoured Glass Inspection
For Exposure To 1200 psi
For Exposure To 482°C
The Sensor Tip Is Submerged In Fluid. How Will The Sensor Respond?
The Sensor Tip Is Submerged In Fluid. How Will The Sensor Respond?
How to Determine the Optimum Distance Between the Printhead and the Paper
Use Fiberoptics When Intrinsic Safety Is Required
Standard Fiberoptic Cabling is 3 Feet Long.
Some Models Can Be Fitted With 49 Foot Cables
Sensor Options For Measurements In High Magnetic Fields
Philtec Sensors Contribute To The Success of the 2003 NASA/JPL Mars Rover Mission
Philtec's Complete Line of Fiberoptic Passthru Solutions are presented for Low, Medium and Ultra-High Vacuum Applications
How To Extend Operating Ranges With Offset and Gain Options
Sensors For Installation In The Cryostat Of An MRI Scanning Machine
A Vacuum Passthru For 8 Sensor Channels Is Space Saving and Cost Effective
Small Fiberoptic Sensors Are A Good Choice For Missing Parts Inspection
Top-Dead-Center Piston Position of IC Engines is Measured
Effects of Gamma Radiation are Discussed
Reflectance Dependence Demonstrated
Reflectance Compensation Demonstrated
How To Avoid Reflection Interference
Retro-Reflective Targets Enhance Auto Engine Diagnostics
High Speed Shaft Runout Measurements Are Made With Right Angle Probes
How To Make Accurate Measurements To Textured Surfaces
Side-Viewing Sensors Are Used To Capture Dynamic Measurements In Tight Spaces
Side-Viewing Sensors Are Used To Measure Shaft Orbit & Vibrations In Tight Spaces
Temperature Stabilized Amplifiers Are Recommended Where Long term Stability is Required.
The Target Is A Potted Resin In Vacuum and High Magnetic Field
Sensor Tip Orientation Is Critical With Small Moving Targets
Single-Port Weldable Vacuum Passthru Fitting
Small Valve and Diesel Engine Valve Applications Are Discussed
